MD-01 Medical components医疗器械零件
Machined block机加工块件
- Machining加工
- Precision machining精密机加工
- Features结构
- Flat faces and drilled openings平面与孔结构
Medical equipment & instrument components医疗设备与器械零件
Small precision components for medical equipment and instrument projects. Critical dimensions, surface condition and traceability are reviewed to the customer drawing.面向医疗设备与器械项目的微型精密零件，按客户图纸评审关键尺寸、表面状态与可追溯性要求。
MD-02 Medical components医疗器械零件
Small round component小型圆形件
- Machining加工
- Precision machining精密机加工
- Features结构
- Compact round profile小型圆形外形
MD-03 Medical components医疗器械零件
Machined bracket机加工支架
- Machining加工
- Precision machining精密机加工
- Features结构
- Block section with circular openings块状部与圆孔
MD-04 Medical components医疗器械零件
Flanged shaft component法兰轴形件
- Machining加工
- Precision machining精密机加工
- Features结构
- Circular flange and projecting shaft圆形法兰与凸出轴段
MD-05 Medical components医疗器械零件
Slender shaft component细长轴形件
- Machining加工
- Precision machining精密机加工
- Features结构
- Long shaft and enlarged end section细长轴与加大端部
Drawing & inspection requirements图纸与检验要求
Delicate features that meet the drawing让精细结构符合图纸要求
Identify functional dimensions, assembly interfaces and acceptable edge conditions. Review material and post-processing effects on the finished geometry.明确功能尺寸、装配接口与允许的边缘状态，评审材料及后处理对最终几何形状的影响。
Agree measurement access, gauging and first-article coverage for the critical features.确认关键部位的可测性、量检具与首件检测范围。
Surface condition specified by location按部位明确表面要求
Mark the surfaces that matter and define the required finish, edge treatment and final supplied condition.标明重要表面，明确表面质量、边缘处理及最终供货状态。
Agree roughness measurement locations and visual inspection criteria, together with any additional validation your application requires.确认粗糙度测量部位、外观检验标准，以及具体应用所需的额外验证。
Material and cleanliness requirements agreed early提前确认材料与清洁要求
Specify the material standard and documentation, cleaning requirements and packaging. Confirm any qualification requirements before sharing the full project.提供材料标准与文件要求、清洗要求及包装要求，并在详细项目沟通前确认资格要求。
Agree the material records, batch identification and cleaning-validation responsibilities needed for acceptance.确认验收所需的材料记录、批次标识，以及清洗验证的责任范围。
Discuss your component沟通零件要求
Intended use, exact material standard, critical features, finished surface requirements, cleaning and packaging specification, and required qualification documents.预期用途、准确材料标准、关键结构、最终表面要求、清洗与包装规范，以及资格文件要求。
Contact DFW联系东峰沃Request a quote加工询价
Email your drawing, material, quantity and required delivery date.请邮件提供图纸、材料、数量与目标交期。